Screen Porch Remodel - Drywall Day 3

Since we both work full-time jobs, not a whole lot gets done on the weekdays so color me surprised to come home and find my husband hard at work measuring and cutting drywall. Once I got the kids settled in with Sesame Street for a little bit I was able to lend a hand between prepping dinner and cleaning up dishes. He got three pieces cut and hung around the slider which was his goal. Good job, hubby-poo!

Left side                    and                   right side

So, we are slowly progressing and hopefully my husband will be able to start on or even finish the header (seen in the left side photo above) over the windows and exterior door tomorrow evening.Then come the time consuming cuts with the outlets.

Screen Porch Remodel - Drywall Day 2

After getting the ceiling up yesterday we set our sights on getting a couple walls dry walled. One wall got done when the weather ended up being beautiful and perfect for lawn care and gardening. Plus, we got a visit from the lawn care/garden fairy also known as Grandpa. The gardens were looking sad. The first two are what the big garden looked like before weeding.

  

This is how it looked after quite a bit of work from my husband and his father.

 The raised beds got some love with weed removal as well.

All that outdoor work didn't stop the indoor though because one wall got drywall.

The next day will hopefully bring drywall to the slider door wall. Then begins the Tetris cut work around the windows and new outside door. Should be interesting to see how it all pieces together.

Screen Porch Remodel - Long Time, No Update

It has been a very long time since I updated this blog on the progress on the screen porch. There wasn't a whole lot of change other than some wiring, insulation, and exterior lighting and caulking.

Here's where we ended up after some work here and there over the fall, winter, and spring. The wiring was run outside for the new exterior light. We also beefed up the number of outlets in the room by running some under the new windows.

Then we added installed insulation and pumped Great Stuff into the areas where insulation wouldn't fit. The wiring box for the ceiling was upgraded to handle a fan and light. You can see in the photo below where the insulation was removed to hopefully tie into the HVAC line in the ceiling, but we couldn't find any vent pieces that would tie into that line with such a small clearance. We gave up and decided to just leave it alone.

 You can barely see the new outlets peeking out from behind the mess and insulation.

 More outlets under the windows.

It is definitely a mess in progress.

That brings us to yesterday where work began again since the biking season for Ohio Randos has slowed down a bit. Walls were measured, calculations were made, and drywall was purchased. It was a hot, muggy day, but that didn't slow down the dry-walling machine that is my husband. We even had some "help" from the little girls at times. The ceiling panels were all cut and mounted successfully. Dyrwall - Day One is Complete.

Let's look back at that to-do list shall we?

• Tear out the existing screening, door, and framing
• Remove the ratty, green, plastic carpet
• Remove the siding that is inside the screened porch
• Frame out the new walls with 2x6 wood so we can pack in more insulation (plus the corner beam is a 6x6 so we thought it would be better to have the wall depth match and cover the beam)
• Install HUGE new windows (which will have a nice deep sill on the inside thanks to the 2x6 framing) and a new glass door that is bigger than the teeny tiny one we have now
• Install siding on the outside that matches our current siding (Although, we have discussed changing out all the siding for something with more interest. We're tired of beige and white houses. That is further in the future though.)
• Tear-out of the old plywood inside the room - nope, just going to drywall right over it
• Additional tear out of the ceiling "siding" and all the exterior trim that can be removed
• Run new outlets and wiring for the room since it was a screened porch and currently has one outdoor outlet
• Move the exterior light next to the slider outside to the deck - Um, yeah. The husband kind of gave away our old light so we'll be shopping for a new one
• Reinsulate the walls and ceiling - this will only be insulate the new walls because the original walls do have insulation
• Drywall (in progress)
• Paint - there have been suggestions for painting it purple, but I'm thinking we may end up boring and pick a white with a warm tint.
• Install electric underfloor heating - decided to tie into the heat duct that runs up to our youngest daughter's room - Doesn't appear to be an option now and we have decided to skip adding any heating and possibly putting a small space heater or electric baseboard one in if we find that the room gets too cold for use in the winter.
• Find some kind of flooring that we can agree with (husband wants tile, I want cork) - After researching over the winter and gaining more flooring knowledge we are agreeing on cork now and will be installing the flooring ourselves for the first time ever.
• Install a ceiling fan to keep the room cool during the warm months since there isn't any HVAC ducting to it - we'll still install a fan to keep it comfortable when the windows are open
• Figure out some kind of table and seating arrangement (banquette, benches, round table with chairs, etc.)
• Decorate

Screen Porch Remodel - Day 6 and a couple hours

Day six was the day that the outside was to be finished. Well, it almost got there...

The siding was put up on the deck side and the tear out on the other side began and it was decided that they would run out of time to finish it that day. We used the light mount box that was on the inside of the screen porch on the outside for a future light purchase. Some of the siding is pretty dirty from being stored in our pole building and some of it is a slightly darker color from being sheltered from the sun inside the screen porch, but it should all match up after a good washing and some sun exposure. So, here is where it stood after a complete day six.

 Deck side complete. Check!

 J in his natural state or just trying to figure out if they can complete the other side before the end of the day.

Starting the tear out of the other side before deciding to call it a day.

The next day of work came and what they thought would be a few hours ended up only taking them an hour tops. Guess that work could have been finished on day six instead of day six plus a few hours. That's all right, we got to visit with Jon for a bit before he went home. Here is the outside complete in all it's windowed, doored, and sided glory.

 You can really see the color difference in the extra pieces here, but they should clean up and match nicely.

 Lots of little cuts to go between the windows and on the corner behind the drain.

Here is the side that only took an hour to complete.

Now we look into the interior, plus a few other plan adjustments. Let's revisit our to-do list, shall we?

• Tear out the existing screening, door, and framing
• Remove the ratty, green, plastic carpet
• Remove the siding that is inside the screened porch
• Frame out the new walls with 2x6 wood so we can pack in more insulation (plus the corner beam is a 6x6 so we thought it would be better to have the wall depth match and cover the beam)
• Install HUGE new windows (which will have a nice deep sill on the inside thanks to the 2x6 framing) and a new glass door that is bigger than the teeny tiny one we have now
• Install siding on the outside that matches our current siding (Although, we have discussed changing out all the siding for something with more interest. We're tired of beige and white houses. That is further in the future though.)
• Tear-out of the old plywood inside the room - nope, just going to drywall right over it
• Additional tear out of the ceiling "siding" and all the exterior trim that can be removed
• Run new outlets and wiring for the room since it was a screened porch and currently has one outdoor outlet
• Move the exterior light next to the slider outside to the deck - Um, yeah. The husband kind of gave away our old light so we'll be shopping for a new one
• Reinsulate the walls and ceiling - this will only be insulate the new walls because the original walls do have insulation
• Drywall
• Paint
• Install electric underfloor heating - decided to tie into the heat duct that runs up to our youngest daughter's room
• Find some kind of flooring that we can agree with (husband wants tile, I want cork)
• Install a ceiling fan to keep the room cool during the warm months since there isn't any HVAC ducting to it - we'll still install a fan to keep it comfortable when the windows are open
• Figure out some kind of table and seating arrangement (banquette, benches, round table with chairs, etc.)
• Decorate

Screen Porch Remodel - Day 5 Follow-up

So, there was a minor detail I forgot to mention about what happened on work day five. Word of caution to all the DIYers out there. Watch your bonus helpers. Watch them very, very carefully. For that matter, depending on who they are, you may not want to let them hold or use any tools.

Someone, we won't name names, thought the J channel would be better off attached to the window frame and not the Tyvek wrapped OSB. He was adamant that his way would work best despite repeated warnings and orders to put the hammer down. Here are the results.

That is a 1 inch hole in the side of the window.

So, we fixed it. More of that silver tape from the top of the window all the way down the side of the window frame. We got lucky. The glass didn't shatter, the frame wasn't damaged more, and we didn't have to replace the whole window which would have been very, very pricey. Lesson learned by all.

Screen Porch Remodel - Day 5 (It's the little things)

It doesn't look like a lot of change in the pictures, but there was a good bit of work done before and during day five. Here is the breakdown of the work completed before day five.

• Taping completed on the windows and door
• Door painted to match the siding
• Door hardware installation started (one strikeplate needs replaced and everything needs locktight)

Day five brought out our worker Jons in addition to a bonus worker grandpa who stopped by to add color commentary. They cut, fit, and attached all the J channel around the windows and doors. They also planned out the siding attachment strategy with a box for a future outdoor light fixture and trying to make the siding as seamless as possible with the existing house. It will be interesting to see how it all comes out on the next work day. Here are some pictures of the day.

 J channel application in process.

 Before the J channel...

 My Jon gives the other Jon an "adjustment".

 Precision cutting and fitting.

 Painted door with hardware.

 Completed day five work (can you even see the J channel?)

More practically invisible J channel and a lovely corner piece to clean up that messy Tyvek.

Day five is in the can and hopefully the next work day brings some siding into the picture. We need to get this house buttoned up before we get our first snow...usually in October. I kid you not.

A little monster for October

I was inspired by this monster wreath tutorial over on Baby Rabies and had to try it out. I've been pinning wreaths to make for my front door and this is the first one I've actually completed. I made some adjustments in making the wreath. I shied away from using a hot glue gun because I didn't feel like digging it out and plugging it in. I just used small straight pins to pin the black ribbon down over the wreath (14" straw wreath with the plastic still on), used pins to tack on the foam teeth, and pins to attach the bow-tie and hanging ribbon. Here is my finished product.

He's a bit fluffy and gets smooshed behind the storm door so I might trim him back a bit. For now, we love him.